Fast-Charger Carton Net

Made with AI

Model: Generated via Popcorn Editor

“Design a compact tech-accessory carton for an invented 45W GaN fast-charger, shown as a real flattened box net (not a single front panel like the sibling packaging/boxes.json) on ONE 220×180mm artboard named 'Carton net' (cmyk/300dpi/3mm bleed). Declare three process swatches — 'graphite' cmyk[70,50,35,75], 'volt' cmyk[35,0,88,0], 'paper' cmyk[4,3,7,0] — plus two spot swatches 'cut' cmyk[0,100,0,0] purpose 'die cut' overprint:true, and 'crease' cmyk[100,0,0,0] purpose 'crease' overprint:true. Panel layout (six panels forming a cross/net, all upright — no rotation used anywhere): Left side panel x0–40,y40–140 (40×100); Front panel x40–110,y40–140 (70×100); Right side panel x110–150,y40–140 (40×100); Back panel x150–220,y40–140 (70×100); Top panel x40–110,y0–40 (70×40); Bottom panel x40–110,y140–180 (70×40). Start with one full-bleed 'Background field' rect x-3,y-3,w226,h186 fill graphite under everything (the four net corners outside the die stay graphite — authentic trim waste, not a defect). Front panel (named group 'Front panel'): a volt rect exactly x40,y40,w70,h100; inside it a small graphite 'Brand mark' tick (5×5 rect at x46,y49) plus a 'NODE' wordmark beside it (x52,y47.5,w52,h6, Space Grotesk 700, 12pt, letterSpacing 3, upper, fill graphite); the HERO — a giant centered numeral, content '45', x40,y50,w70,h66, Archivo Black 150pt, align center, lineHeight 1, fill graphite (graphite-on-volt, must read instantly at thumbnail scale); a spec strip x46,y124,w58,h6, content '45W · GaN FAST CHARGE', JetBrains Mono 8pt, letterSpacing 1.2, upper, fill graphite. Left panel (group 'Left panel', graphite ground): one vertical accent rule x36,y44,w0.6,h92 stroke volt; one stroke-only rounded 'Port outline' rect ~10×4mm centered near x15,y85, stroke paper 0.4, no fill. Right panel (group 'Right panel', graphite ground): text 'INDOOR USE ONLY' x114,y44,w32,h8, JetBrains Mono 5.5pt, letterSpacing 0.5, fill paper, lineHeight 1.3. Declare ONE reusable styles.blocks entry 'brand-lockup' (width34,height7): a volt 5×5 rect key 'tick' at x0,y0.5, plus text key 'wordmarkSmall' content 'NODE' x8,y0,w26,h7, Space Grotesk 700, 11pt, letterSpacing 2.5, upper, fill paper. Instance it via top-level blockInstance elements TWICE, no overrides (both sit on graphite grounds): on the Back panel at x156,y48, and on the Top panel at x44,y6. Back panel (group 'Back panel', graphite ground): below its block instance, body copy x156,y70,w58,h30, content 'Compact 45W GaN charger built for a single bag pocket. One USB-C port, universal input, foldable prongs.' Space Grotesk regular 8pt, lineHeight 1.4, fill paper opacity 0.9; a live data line x156,y120,w58,h5, content 'SKU {{field:SKU}}', JetBrains Mono 7pt, letterSpacing 1, fill volt (genuinely earned — made-to-fit electronics cartons print in runs varying by SKU); a regulatory line x156,y128,w58,h5, content 'NET WT 120G · INPUT 100–240V~', JetBrains Mono 6pt, opacity 0.6, fill paper. Top panel (group 'Top panel', graphite ground): below its block instance, a descriptor x44,y18,w62,h5, content '45W FAST CHARGER', Space Grotesk 500, 7pt, letterSpacing 1.5, upper, align center, fill paper opacity 0.75. Bottom panel (group 'Bottom panel', graphite ground): one centered line x44,y158,w62,h8, content 'PACKAGING: FSC-CERTIFIED BOARD', JetBrains Mono 6pt, letterSpacing 0.5, upper, align center, fill paper opacity 0.7. Finish with a 'Die & crease' group: one closed 'Cut contour' dieline swatchRef cut, closed:true, tracing the FULL net silhouette with these EXACT points in order — (40,0),(110,0),(110,40),(220,40),(220,140),(110,140),(110,180),(40,180),(40,140),(0,140),(0,40),(40,40) — do NOT stop this outline partway at x=150; it must extend the full width to x=220 so the Back panel's content at x150–220 sits fully inside the die (verify by hand: the top edge runs (110,40)→(220,40) as one straight line spanning Right+Back, and the bottom edge runs (220,140)→(110,140) the same way, before turning down into the Bottom-panel bump). Plus THREE open (closed:false) vertical crease dielines swatchRef crease at x=40, x=110 and x=150, each spanning y40→140 (the Left/Front, Front/Right and Right/Back folds). Plus TWO open horizontal crease dielines at y=40 and y=140, each spanning x40→110 (the Top/Front and Front/Bottom folds). No photography, no lorem ipsum, no real brand names. Named Fabric groups + specific human-readable names on every element throughout. Author incrementally per PRINCIPLES.md: build the Front panel group first as the initial skeleton, validate --compile, then Edit in each remaining panel group one at a time, then the block definition + instances, then the Die & crease group last, validating with templates:validate --compile after every addition — do not attempt this dense single-artboard document in one Write past the first group.”