Zone Four — Workwear Back Panel

Made with AI

Model: Generated via Popcorn Editor

“Design a print-ready workwear BACK panel art panel, 350×420mm, RGB, 150dpi, no bleed — a non-personalized hazard/signage graphic (NOT a garment mockup, and NOT using variable/merge-data fields — this is a generic printed design, not per-wearer personalization). Register: utilitarian hi-vis signage, bold and legible at distance. Palette: full-bleed Safety Orange ground #FF6A13, Screen Black #17140F ink, Reflective Grey #C7CBCE accent plate — three flat swatches, no gradients. Top hazard stripe band spanning the full width, y0–90: 4–5 repeating 45°-angled black parallelogram stripes on the orange ground, period 70mm (35mm stripe + 35mm gap); each stripe a closed path with points bottom-left (i·70,90), bottom-right (i·70+35,90), top-right (i·70+35−90,0), top-left (i·70−90,0), fill Screen Black, for i=−2..6 (trim overflow at 0 and 350). Below the band (y110–122): a black crosshair registration mark x28–46 and a right-aligned spec tag x190 y112 w150 "HI-VIS CLASS 2 · SITE GRAPHIC · NOT PERSONALISED" Overpass Mono 8pt letterSpacing 1 Black. Hero plate: Reflective Grey rounded rect x40 y170 w270 h150 cornerRadius 6; inside it "ZONE" Teko Bold ~70pt x60 y185 w230 h60 align left Black, and "04" Teko Bold ~150pt x60 y235 w230 h140 align left Black beneath it (verify against real glyph metrics and resize to fit cleanly inside the plate — this numeral is the single dominant focal element). Footer x28 y396 w300 "EN ISO 20471 · HAND-SCREENED · EARLY SHIFT" Overpass Mono 9pt Black tint 0.6. Group as "Hazard stripe band", "Registration & spec", "Zone plate", "Footer".”