Split Second — T-Shirt Print Graphic

Made with AI

Model: Generated via Popcorn Editor

“Design a single front-chest print graphic (the print-ready artwork panel, not the garment itself), 300×400mm, RGB, 150dpi, no bleed, meaningful margin — NOT full bleed, the print sits on fabric. Concept: a giant scoreboard split-time reading is the entire hero, with a lap-split ledger as the supporting device; a bold, screen-print-friendly 2-3 color composition, no gradients, no hairlines finer than 0.3. Palette: Chalk ground #F5F2EA, Ink Black #17140F hero ink, Cobalt Blue #1740A6 accent — three flat swatches. Kicker at x30 y32 w244 "PACE · NEGATIVE SPLIT" Space Mono 10pt letterSpacing 3 upper Cobalt. Hero numerals "04:12" at x28 y100 w244 h130, Space Grotesk Bold ~150pt, Ink Black, left-aligned — this is the one dominant focal element, size it to fill the panel width with generous top/bottom breathing room, verify against real glyph metrics and adjust size if it overflows. Cobalt rule bar x28 y240 w180 h6. Below the rule, a right-aligned lap ledger: 6 rows at 17.3mm pitch from y256, each row = a hairline divider (Ink Black tint 0.2, width 0.3) above a left label "LAP 0X" and right-aligned split time, Space Mono 9pt Ink Black, columns roughly x196 (label) / x250 (time) within a 196–276 block width. Use these exact invented lap times (a realistic negative-split progression, laps 01→06): 0:42.0, 0:41.3, 0:40.6, 0:40.0, 0:39.1, 0:38.4. Footer line x28 y370 w240 "TIMED BY HAND · EVERY SECOND COUNTS" Space Mono 8pt Ink Black tint 0.6. Group into "Kicker", "Hero time", "Lap ledger", "Footer" named groups.”