Apparel & Textile
Ascent Mark — Hoodie Back Print
An abstract geometric emblem back print — a disc carved with a summit V-notch and ringed in acid lime — instead of a giant slogan wordmark.
- Abstract carved-disc emblem, full-bleed field
- High-contrast reversal, 3 flat colors
- Screen print + puff ink spec
Made with AI
Model: Generated via Popcorn Editor
“Design a print-ready hoodie BACK-print art panel, 340×430mm, RGB, 150dpi, no bleed — NOT a garment mockup. Concept: an abstract geometric emblem is the entire hero (no giant wordmark) — a large disc with a V-shaped notch carved from its top edge (a summit/ascent silhouette in negative space), ringed, with a small condensed wordmark beneath. Palette: full-bleed Charcoal ground #1B1B1B, Bone #F1EBDD hero disc/type, Acid Lime #C4F135 ring/accent — three flat swatches, no gradients. Top "Registration & spec" group: Bone crosshair ~x28–46 y28–40 (vertical bar 4×20, horizontal bar 20×4), right-aligned spec tag x190 y32 w150 "SCREEN PRINT · PUFF INK · 2 COLOR" IBM Plex Mono 9pt letterSpacing 1.5 Bone. "Emblem" group centered at board x=170: Bone disc ellipse x70 y110 w200 h200; a Charcoal-filled closed path sitting on the disc's top edge with points ~(140,110)→(170,170)→(200,110) carving a downward V-notch into the circle (mountain-peak negative space); an Acid Lime stroke-only ring ellipse x60 y100 w220 h220 stroke width 3 no fill (slightly larger than the disc so it reads as an outer halo). Below the emblem: wordmark "ASCENT" Staatliches ~90pt x40 y330 w260 h50 align center Bone; kicker "ATHLETIC CO. — EST. 04" IBM Plex Mono 11pt letterSpacing 4 align center Acid Lime x40 y388 w260 h10. Foot spec line x28 y410 w300 "WASH INSIDE OUT · PUFF PRINT — DO NOT IRON" IBM Plex Mono 8pt Bone tint 0.7. Group as "Registration & spec", "Emblem", "Wordmark", "Foot spec" — verify the notch path renders as a clean carved V against the disc, not a stray floating triangle.”