Corporate Gifts
USB Drive Imprint Faces
The print-ready two-up imprint layout for a wooden USB drive — both faces of the body side by side on one maple-toned sheet, a pixel-monogram brand mark on the front and the capacity/URL data on the reverse, single dark ink.
- Two-up: both drive faces on one sheet, not a 3D mockup
- Light maple body + one dark pad-print ink
- Pixel/data-grid monogram as the distinctive mark
Made with AI
Model: Generated via Popcorn Editor
“Design the print-ready two-up imprint layout for a wooden USB drive — a single 130×64mm sheet showing BOTH faces of the drive body side by side (the real artwork a pad-printer receives; NOT a 3D mockup) — for an invented studio/brand (invent a short plausible name like 'NORTHWOOD' — never a real company). Register: warm, precise, tactile — a light maple body with ONE dark ink. Declare TWO process swatches: 'maple' cmyk[10,22,44,6] (a warm light wood tone — the drive-body fill) and 'walnut' cmyk[34,50,62,52] (a deep warm brown — the single imprint ink). White artboard. Layout: two drive-face windows as 'maple' rounded-rects (corner radius ~2.5) with a 0.3mm 'walnut' hairline keyline — FACE A at x:10 y:18 width:54 height:22, FACE B at x:66 y:18 width:54 height:22 (a 2mm gutter at x:64); a small mono caps label above each ('FACE A — TOP', 'FACE B — REVERSE') in 'walnut' ~5.5pt at ~y:12. FACE A carries the brand mark: a compact PIXEL/DATA-GRID device (a tidy grid of small 3×3mm 'walnut' squares at ~4mm pitch, several cells present to read as an abstract data-chip monogram — a nod to storage) beside/above the wordmark in a tracked grotesque (~8pt). FACE B carries the utility data: a capacity '16 GB' set larger, an invented URL 'madewell.co' and a tiny 'FSC MAPLE' line, all in 'walnut'. Under both windows a thin 'walnut' rule at ~y:46 and a spec caption 'PAD PRINT · 1 COLOUR · MAPLE BODY · WINDOW 54 × 22 MM' in mono ~5pt. Precise alignment, generous white margins; the pixel-monogram is the one distinctive move. No photography, no second colour. Named Fabric groups ('Face A', 'Face B', 'Spec strip'); a specific name on every element. bleed 0.”